ultra-rubberguard
Material Safety Data Sheet
Ultra-Rubberguard is a UV resistant, acrylic based rubberising compound for corrosion protection and moderate abrasion applications. The coating can be applied up to 6 mm thick. Materials are water based and non-toxic. No noxious fumes during painting and no need for solvents. Multiple coats can be applied on the same day if higher dry film thickness is required. Not recommended for use on substrates that are permanently submerged in water.
Technical specifications
- Colour
- Black plus a limited range of colours
- Vehicle type
- Acrylic
- Solvent
- Water
- Thinner
- Must not be thinned
- Specific gravity
- 1.1
- % Solids by mass
- 56%
- Fire index (SABS 0177-11I)
- Class 3
- Finish
- Textured matt
- Pigments
- Rubber, organic pigments
- Cleaner
- Water
- Flash point
- Not flammable
- Viscosity
- Semi past consistency
- % Solids by volume
- 59% minimum
- Pot/shelf life
- 7 days/3 months
The normal spreading rate for Ultra-Linemark is 1 m2/litre at 25 micrometers Dry Film Thickness (DFT) on a smooth surface. However, a practical calculation is required for separate substrates.