Ultra-MetalTreat
- Introduction
- Advantages
- Uses
- Application
- Technical Info
- Cleanup
- Storage
Ultra-MetalTreat is formulated with an excellent rust-block additive that protects all types of metal against corrosion. The product is ideal over Ultra-MetalPrimer for areas such as metal, rolled steel, mild steel, stainless steel, etc.
Additional advantages include:- Deep penetration into the substrate
- Waterproofing properties
- Excellent permeability
- Good adhesion of the Ultra-Coat product
- The Ultra-MetalTreat has a high fire and heat resistance
- No chipping or scaling
- The Ultra-MetalTreat is Non-toxic and odourless
- Corrosion resistance
- Ultra Violet resistance
- Fungus and chemical substance resistance, e.g. acid, alkaline, etc
- Creep resistant
| Industrial bridge treated with Ultralast MetalTreat |
 |
- Deep penetration
- Waterproofing property
- Excellent permeability
- Good adhesion of the top coat
- High fire resistance
- No chipping or scaling
- Anti-fungus, chemicals resistance such as acid, alkaline etc.
- Non-toxic and odourless
- Heat resistance
- Ultra Violet resistance
- Creep resistance
Ultra-MetalTreat is designed to protect metal from rust. It is suitable for application over the following surfaces:
- Metal
- Rolled steel
- Mild steel
- Stainless steel
All flux/scaling on welded areas should be removed.
All new surfaces should be cleaned with cleaner. Generally, one coat Ultra-MetalTreat is required before further application.
Surface Preparation
- Colours
- Black, Brown, Green, Red and many more
- Solid () by volume
- 46 + 1 %
- Gloss
- Slightly sheen
- Water resistance
- Excellent
- Abrasion resistance
- Good
- Corrosion resistance
- Good
- Spreading rate
- 8 to 10 m2 per litre at dried film thickness of 56 microns
Clean all equipment thoroughly with water immediately after use.
Keep containers well sealed.
Store at moderate temperatures.