Ultra-FireGuard
- Introduction
- Advantages
- Uses
- Application
- Technical Info
- Cleanup
- Storage
Ultra-FireGuard is a water borne acrylic membrane that is formulated in either clear or in a variety of colours and provides sealing and fire retardant qualities. Ultra-FireGuard is used to delay the normal thatch or brush fencing rotting process and subsequently lengthens the life of the thatch or fence. It also keeps the thatch sturdy and prevents birds from pulling out thatch. If sprayed on the inside it prevents dust rains in the house. Ultra-FireGuard waterproofs the roof, which will reduce the weight of the roof. It also eliminates the required frequent brushing and re-thatching of roofs.
Additional advantages include:High fire and heat resistance, (210oC). Stain resistant.
Superior Fire Retardant clear acrylic membrane for timber fencing.
| Thatch fence treated with Ultra-FireGuard |
 |
| Bamboo reed treated with Ultra-FireGuard |
 |
- Fast drying, waterborne, clear, semi-gloss or coloured.
- Ultra Violet resistance - does not yellow with age.
- Waterproofs fences.
- Easy spread rate.
- High fire and heat resistance, (210oC). Stain resistant.
- Excellent adhesion capabilities.
- Non-toxic and odourless.
- Lengthens life of fencing - natural preservative.
- Fungus and chemical substance resistance, e.g. acid, alkaline, etc.
Ultra-FireGuard can be used for the following purposes:
- Brushed fencing
- Bamboo fencing
- Thatched roofing
- Timber fencing
Thatch Roofing
Remove all rotten thatch pieces by combing roofs.
Hose off any dirt / dust matter.
Roofs should have at least five days of sun after hosing or rainy weather before application.
Ultra-FireGuard should be sprayed on with low pressure application.
Other surfaces
Hose off any dirt / dust matter.
Roofs should have at least five days of sun after hosing or rainy weather before application.
Ultra-FireGuard can be sprayed on with low pressure application, or brushed on.
- Storage
- Keep containers well sealed at moderate temperatures
- Clean up
- Clean all equipment thoroughly with water immediately after use
- Colours
- Antique, New Thatch, Camouflage, Natural or in desirable colour
- Solids (% by volume)
- 70% ± 1-2%
- Gloss
- Semi-gloss
- Spreading rate
- 650 - 1000 ml/m2
Clean all equipment thoroughly with water immediately after use.
Keep containers well sealed.
Store at moderate temperatures.