International Ph: +61 2 8338 9997   Ultralast International Pty Ltd
 
 

Surface Preparation - Aluminium

The Aluminium surface you are working with may have to be treated differently depending on its current state

New / uncoated

For optimal results on a Aluminium surface in a New / uncoated state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preparation
  1. Degrease the surface with general purpose cleaner or Ultra-Clean using Scotchbrite pads
  2. Rinse with clean water
Application
  1. Apply 1 coat Ultra-BondFirst
  2. Apply 2 final coats of Ultralast product of choice
Products that can be used
Previously painted & sound

For optimal results on a Aluminium surface in a Previously painted & sound state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preparation
  1. Abrade with fine wet or dry sand paper using Ultra-BondFirst as a lubricant
  2. Rinse with clean water
Application
  1. Apply 1 coat Ultra-BondFirst
  2. Apply 2 final coats of Ultralast product of choice
Products that can be used
Previously painted & flaking

For optimal results on a Aluminium surface in a Previously painted & flaking state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preparation
  1. Remove existing coating with paint stripper, or by Scrapes
  2. Degrease surface with general purpose cleaner or Ultra-Clean using Scotchbrite pads
  3. Rinse with clean water
Application
  1. Apply 1 coat Ultra-BondFirst
  2. Apply 2 final coats of Ultralast product of choice
Products that can be used
Original finish (Not coloured)

For optimal results on a Aluminium surface in a Original finish (Not coloured) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preparation
  1. Remove existing coating with paint stripper, or by Scrapes
  2. Degrease surface with general purpose cleaner or Ultra-Clean using Scotchbrite pads
  3. Rinse with clean water
Application
  1. Apply 1 coat Ultra-BondFirst
  2. Apply 2 final coats of Ultralast product of choice
Products that can be used
 
 
© 2012 Ultralast Australia Pty Ltd