Ultralast - Ecoating System

Ultra-bond is a highly acrylic water bond penetrating primer or undercoat that has excellent flexibility and impact resistant properties on all surfaces it's applied to. Ultra-Bond is suitable for application over old and new concrete, slates, bricks, plaster, asbestos, roof tiles, hard boards, chip boards; aluminium galvanized steel, painted areas, etc. More info...

Ultra-Seal is a water bond, ready to apply elastic waterproofing sealant for filling and sealing cracks and joints in metal, concrete and wood surfaces, which prevents water penetration. When cured, it forms a tough, highly durable, flexible seal that has ultimate protection properties and can tolerate thermal shrinkage movements of the substrates. It is ideal for application to metal roofs, parapets, dams, gutters, down pipes, concrete roofs, pre-cast panel walls, glazing, etc. More info...

Ultra-Concrete Seal is a highly acrylic water bond, low viscosity, and penetrating primer or undercoat. It reacts with substrates to ensure better adhesion with excellent impact resistant properties on all surfaces. Ultra- Concrete Sealer is suitable for application over old and new concrete, slates, bricks, plaster and roof tiles. More info...

Ultra-Paint acts as a one-way membrane, allowing moisture to escape to the surface but prevents moisture ingress into the treated substrate. More info...

Ultra-Treat is formulated with an excellent rust-block additive that protects all types of metal against corrosion. The product is ideal for areas such as metal, rolled steel, mild steel, stainless steel, etc. More info...

Ultra-Clean is a water-based multi purpose cleaner and degreaser for application to metallic and porous substrates such as concrete, wood, gypsum board and plaster, as well as ferrous and non-ferrous surfaces such as aluminium and intact galvanising. Can also be used to remove algae, stains from baths, cement from bricks, etc. Not recommended for use on fabric material unless tested. An additional advantage is the absence of toxic fumes during application. More info...

Ultra-Screed is an acrylic-based floor screed for high impact areas. The product's principal characteristic is to build high films that cover irregular surfaces. Similar to the other Ultralast products, Ultra-Screed has good waterproofing qualities, excellent abrasion resistance ideal for vibrating structures, and is nontoxic with negligible hazardous air pollutants. More info...

Ultra-Varnish is a water bond acrylic, electrometric membrane that is formulated as a clear product and which provides superb sealing qualities. It penetrates deep into the surface and reduces oil, grease, acids, and alkalis seeping into the surface and causing deterioration. The acrylic resin enables it to bridge hair line and minor cracks within the substrate. It also keeps dust down and forms a durable waterproofed surface, which is chemical and abrasion resistant. Ultra-Varnish is used alone as waterproofing coating where the natural colour is to be preserved, such as face brick, wooden doors and window frames, roof tiles, stones, etc. Furthermore, it could also be used as reinforcement to fibreglass to gain maximum benefit. More info...

Ultra-Thatch is a water bond acrylic membrane that is formulated in a variety of colours and provides sealing and fire retardant qualities. Ultra-Thatch is used to delay the normal thatch or brush fencing rotting process and subsequently lengthens the life of the roof or fence. It also keeps the thatch sturdy and prevents birds from pulling out thatch. If sprayed on the inside it prevents dust rains in the house. Ultra-Thatch waterproofs the roof, which will reduce the weight of the roof. It also eliminates the required frequent brushing and re-thatching of roofs. More info...

Ultra-Road is a pure acrylic emulsion paint for application to tar/bitumen and concrete roads. More info...

Ultra-Rubberguard is a UV resistant, acrylic based rubberising compound for corrosion protection and moderate abrasion applications. The coating can be applied up to 6 mm thick. Materials are water based and non-toxic. No noxious fumes during painting and no need for solvents. Multiple coats can be applied on the same day if higher dry film thickness is required. Not recommended for use on substrates that are permanently submerged in water. More info...